AI Design Studio

The design studio at /in/design turns a written description into a 3D mesh you can download or have printed in India. You type a prompt, pick a mode, and get back a model, a mesh review built on real measured geometry, and a print estimate for that model. Downloads are STL, 3MF and OBJ, and the print panel beside the model prices it in rupees at the size on screen and sends a print request.

You need an account to generate. New accounts start with 5 generation credits, and every run is charged before the generator is called. The studio and its credit costs are the same in India as everywhere else. Generation runs as a background job, so closing the tab does not cancel it: the studio picks the job back up when you return. One generation runs at a time per account: pressing Generate again while one is still running hands back the same job and charges nothing more, and the page waits up to 20 minutes for a result.

The two modes#

Fast Draft is the default. It skips the two language model round trips that sit in front of a generation (prompt enhancement, then engine routing) and appends the print constraints locally instead. That is most of the difference in wait time. Hi-Fi pays for the full pipeline and a slower engine that returns textures.

Engines#

Auto is the default and is almost always the right answer. Pin an engine only when you know why. The times below are the ones shown in the studio, measured against the live API rather than estimated.

An image or multiview run ignores a Hunyuan or Meshy pin and uses Tripo instead: Hunyuan's image path is the slow Pro endpoint and the Meshy client here only does text. On Auto an image run goes to Tripo v3.1, and TRELLIS.2 is used only when you pin it, in which case no prompt reaches it, because it has no prompt field. Multiview is pinned to Tripo outright, because no other engine reconstructs from several photos.

On Auto, if the first engine fails without saying why, or is too busy to take the job, the run is retried once on Tripo at no extra charge, as long as there is time left in the run's 20 minute budget. A Fast Draft retried this way still comes back untextured, as it was priced. A pinned engine is never swapped for another.

Four mesh options are only accepted by Tripo: a negative prompt, clean topology (smart low poly), split into printable parts, and quad topology. On a Fast Draft left on Auto, asking for any of them routes you to Tripo. On Hi-Fi the routing agent chooses the engine without weighing them, so to be sure they are used, pin Tripo. If you pinned a different engine that choice is honoured and the four settings are ignored; the studio says so in an amber note under the options.

Writing a prompt#

Prompts are capped at 500 characters. The box counts as you type, and when a prompt runs over it says by how many characters and Generate stays disabled until you shorten it; nothing is cut off behind your back. Cmd or Ctrl + Enter generates. A good prompt names the object, then the shape language, then anything the generator would otherwise invent. A bad one asks for a function, a measurement, or a scene.

faceted hexagonal desk planter, thick rim, flat bottom, no drainage hole
low poly fox figurine, sitting, tail curled around its feet, solid base
art deco fan shaped bookend, flat back, heavy foot, stepped front face
ribbed cylindrical pen cup, vertical flutes, closed base, slight taper
wall mounted key hook shaped like a whale tail, flat mounting plate
chunky control knob, twelve grip flutes, flat top, open underside
stylised owl ornament, wings folded, wide flat base, no perch
spiral seashell paperweight, closed aperture, flat resting side

The negative prompt field is the cheapest fix for the most common annoyance. Generators love adding a plinth, a base slab, a nameplate or a chunk of ground. Listing those in the Avoid field removes them before they become plastic. It routes the request to Tripo, so leave the engine on Auto.

base, plinth, pedestal, nameplate, text, lettering, ground, backdrop, stand

• Say what the object sits on: solid base, flat back, open bottom, closed base.
• Say the pose or orientation for anything organic: a standing figure and a sitting one are different meshes.
• Style is a separate control (Geometric, Organic, Mechanical, Architectural, Decorative), so you do not need to repeat it in the prompt.
• Prompts are moderated before a credit is spent. An explicit prompt is rejected with an nsfw error and costs nothing.
• Regenerating the same prompt gives you a different mesh, not the same one refined. If a result is 80 percent right, change it with Edit model below, or download it and fix the rest yourself.

What comes back#

A generated mesh has no true size (the units are whatever the generator emitted), so every model is normalised to fit 170 × 160 × 170mm, and the file you download is that size. Before you see it, the mesh is welded, degenerate faces are dropped, winding is fixed, holes are filled and the model is auto oriented. The repair is reported to you rather than done quietly.

Alongside the model you get the measurements the verdict was made on: whether the surface is watertight, the volume, open boundary edges, non manifold edges, triangle count, the bounding box, the thinnest overall dimension, the steepest overhang, and whether it fits the build plate. There is also a print estimate: grams and hours for one PLA unit at standard quality. Treat that as a sanity check. The price is the rupee figure in the print panel, and the final price is the one we reply with.

A model marked Needs redesign can still be downloaded and repaired in your own software. One number deserves a caveat: the thinnest dimension figure is the smallest side of the bounding box, not a measured wall. It catches a model that came out as a sheet. It will not catch a thin fin on an otherwise chunky model. Look at the mesh.

Changing a model you have#

The Edit model box under the viewer takes a sentence. Changes it can measure are made to the mesh you already have, exactly, change nothing else, and cost nothing. Anything else is redrawn from a picture of the model and rebuilt in 3D.

• An edit is kept in your history as its own design, so the one before it is still there. An exact edit shows the model without its texture, because the mesh itself was rebuilt.
• A picture rebuild is a new model rather than an adjustment, so its dimensions shift a little and it goes through the same repair and review as any generation.
• Exact edits are limited to 120 an hour and the sentence to 300 characters.

History and links#

• History lists every design on your account, newest first. A run that failed says failed, credit refunded. Opening one shows the textured preview, with the repaired copy kept for printing and its measured size and review.
• The History panel opens by itself when you come back to the page while a generation is still running.
• Share to Community posts a design to the public gallery at /gallery, with its prompt. Every tenth design you share adds 1 credit to your balance. Nothing is shared unless you press it.
• Delete removes a design from your history, and it cannot be undone.
• A link of the form /in/design?model=…&generation=… opens a design exactly as History does, textured and upright.

Requesting a print from the studio#

The print panel beside the model prices it the way /in/print does, in rupees by weight from the size on screen (PLA and PETG ₹8 a gram, ABS and ASA ₹10, TPU ₹12, with no minimum): material, colour, Single colour or Multi colour (priced in colour by itself when the design has colours, see /in/docs/studio/multi-color), quality, scale from 50% to 300%, Normal or Priority print, support removal, and a note for the team. Priority print costs 10% of the items, at least ₹200, and support removal costs ₹200. Custom filament (a named brand or special filament) is not offered in India.

There is no checkout or cart in India yet. Request this print opens a short form under the button: name, email, phone (optional), city, six digit PIN code and notes. We reply by email with the final price and how to pay. Nothing is charged when you send the request.

Credits#

Cost is computed before the generator is called and shown on the button. The surcharges stack.

Generation is limited to 20 runs an hour per account. Balances, and the credit packs and plans in rupees, are on /in/docs/studio/credits.

Honest limits#

• No dimensioned features. Threads, bearing bores, snap fits, press fits, hinges with a specified clearance: a text to 3D engine has no concept of any of them and will produce something that looks right and measures wrong. Model these in CAD.
• No tolerances. Two generations from the same prompt are not the same mesh, and nothing holds a fit.
• Scale is assigned by us, not derived from your prompt. Asking for 40mm tall gets you a shape, not a size, so rescale before requesting a print.
• AI meshes need looking at. Repair fixes topology, not intent: a chair with three and a half legs is watertight, well oriented and wrong.
• Text is unreliable. Lettering comes out mushy or invented far more often than it comes out legible.
• Interlocking or moving assemblies do not arrive assembled. Split into printable parts segments the shape; it does not design a joint.
• Repairing a mesh renumbers its vertices, which drops UVs and material textures. That is why an untouched preview copy is kept, and why retexturing works from that copy rather than the repaired one.
• Remove background on the image path is a real step: when the photo's background is cluttered or holds more than one subject, the main object is cut out onto plain white before it is reconstructed. A photo already on a plain background goes through as it is.